How to setup D-Link router

In this tutorial we  drive you to connect you D-Link router to CyberSilent VPN using the L2TP or PPTP protocols.

All changes are made in the webpage of the router generally the ip address is http://192.168.1.1 or http://192.168.0.1 , is enough write it in your favorite browser.

L2TP Protocol

  1. Go to Internet -> Setup
  2. Select PPTP (Username / Password) as your internet connection type;
  3. Select Dynamic IP as your Address Mode;
  4. Into the L2TP Server IP Address field enter the IP address of the server you want to connect to. All our server are listed at https://cybersilent.com/servers/.
    You can use http://whatismyipaddress.com/hostname-ip tool to convert server name to IP address;
  5. Enter your CyberSilent VPN username and password;
  6. Set Reconnect Mode to Always on;
  7. Enter our DNS servers:
  8. Click Save settings above PPTP settings to connect to VPN. May you need to reboot the router and navigate to the “Status” page and click “Connect”.

PPTP Protocol

  1. Go to Internet -> Setup
  2. Select PPTP (Username / Password) as your internet connection type;
  3. Select Dynamic IP as your Address Mode;
  4. Into the PPTP Server IP Address field enter the IP address of the server you want to connect to. All our server are listed at https://cybersilent.com/servers/.
    You can use http://whatismyipaddress.com/hostname-ip tool to convert server name to IP address;
  5. Enter your CyberSilent VPN username and password;
  6. Set Reconnect Mode to Always on;
  7. Enter our DNS servers:
  8. Click Save settings above PPTP settings to connect to VPN. May you need to reboot the router and navigate to the “Status” page and click “Connect”.

Fantastic now your traffic is going through CyberSilent VPN! To be sure that all is good , visit www.whatismyipaddress.com .

 D-Link, Routers, VPN Setup  
Total 0 Votes:
0

Tell us how can we improve this post?

+ = Verify Human or Spambot ?